126 Base Shoe

In Stock

MATERIAL WIDTH HEIGHT LENGTH STOCK
LVL 1/2″ 3/4″ 16′ In Stock
Poplar 1/2″ 3/4″ LF In Stock
Oak 1/2″ 3/4″ LF In Stock
FLEX 11/16″ 7/16″ LF In Stock
Available In:
FJP Pine
FJP Pine (primed finger joint pine) (insert base or casing or crown) moldings are made from short pieces of pine wood, finger jointed and glued together. This creates longer pieces than can normally be achieved from a single log without any of the defects and knots. Pine is a softwood which is a more durable upgrade to MDF while still being cost effective. Our FJP Pine is planation grown to ensure sustainability for years to come.
Poplar
Poplar is a hardwood with typically straight, uniform grain with medium texture. Its color can vary from a light cream to yellowish brown with occasional streaks of gray or green. Poplar moldings are often stained to look like other more expensive woods like Cherry but also can be painted. It is very easy to work with and is among the most economical and inexpensive of all domestic hardwoods. Poplars comes raw (unfinished & unprimed) and comes in random lengths from 8’ to 16’, specified lengths are subject to availability and upcharge. As with all wood moldings additional surface preparation maybe necessary and is recommended.
Flex
Flex is a flexible material, with similar characteristics of rubber. Flex is used in radius applications like arched windows and curved walls. Flex can be painted or stained with a Gel-Stain to match.
Oak
Oak is the most widely used hardwood. Oak is a heavy, strong, light colored hardwood with open pours which create a unique texture. Oak accepts stain very well and can be stained a variety of colors.
FJP Poplar
FJP Poplar (primed finger joint poplar) (insert base or casing or crown) moldings are made from short pieces of Poplar wood, finger jointed and glued together. This creates longer pieces than can normally be achieved from a single log without any of the defects and knots. All Primed FJ moldings have trim-backs. Trim-backs occur during manufacturing when the mounding comes through the molder at the correct length ordered, but a defect is spotted. Rather than throw the whole piece of molding away, the defect is cut out, leaving varied lengths. Therefore when ordering FJP Poplar up to 15% may come shorter than normally ordered.